Logosol LM410 Log Moulder
The log moulder LM410 also works as a jointer/planer for beams of dimensions up to 600 x 600 mm. The track width is adjustable and fits most makes of band sawmills, such as Logosol, Norwood, Woodmizer and Lennartsfors. Patented equipment facilitates the operation and gives a better result.
Fits most brands of band sawmills, such as LOGOSOL, Norwood, Woodmizer and Lennartsfors.
Works as a jointer/planer for beams of dimensions up to 600 x 600 mm.
Perfect working position. The controls can be adjusted to your height.
The log moulder LM410 also fits on the rails of our sawmills, allowing for complete woodworking for your forestry management project. This is part of what makes Logosol such a trusted partner when you are looking for a sawmill partner.
Log Moulder and Beam Planer
A unique log moulder that can do something no other moulder can: besides being a log moulder, the Logosol LM410 is also a jointer/planer for beams of dimensions up to 600 x 600 mm (24″ x 24″). It has to run on rails. The track width is adjustable, which makes the moulder fit on most brands of band sawmills, e.g. LT10 and LT15. For Lennartsfors, which has significantly narrower rail width, you need an adaptor to make it fit, but the adaptor is for free. The cutter head is 410 mm (16″) wide and laterally adjustable. You can use both planing and moulding knives The planing knives are included. The knife sets in the price box below include the knife gibs. You do not have to remount knives between machining the upper and lower side of the log. There are two models: Environmentally friendly gas engine and 3-phase electric motor. The chip hose and the power cable are held in place by a wire that is suspended between posts, which are fitted to the rails of the sawmill. The wire kit is also compatible with the chip duct of the bandsaw, and with the trailer kit.