LM410 Log Moulder – 8HP Gas Motor

$6,999.00

A unique log moulder that can do something no other moulder can: besides being a log moulder, the Logosol LM410 is also a jointer/planer for beams of dimensions up to 600 x 600 mm (24″ x 24″). It has to run on rails. The track width is adjustable, which makes the moulder fit on most brands of band sawmills, e.g. LT10 and LT15. For Lennartsfors, which has significantly narrower rail width, you need an adaptor to make it fit, but the adaptor is for free. The cutter head is 410 mm (16″) wide and laterally adjustable. You can use both planing and moulding knives The planing knives are included. The knife sets in the price box below include the knife gibs. You do not have to remount knives between machining the upper and lower side of the log. There are two models: Environmentally friendly gas engine and 3-phase electric motor. The chip hose and the power cable are held in place by a wire that is suspended between posts, which are fitted to the rails of the sawmill. The wire kit is also compatible with the chip duct of the bandsaw, and with the trailer kit.

Oversized or Overweight Item. Shipping not included.
Please call 1-207-479-7908 for a shipping quote.
Discounted shipping rates will not apply.

SKU: 8000-000-0625 Category:

Specifications

Rail width standard 825-960 mm (32 9/16″-37 7/8″). Suitable for both narrow, flat and angled rail types. Flexible wheel suspension which can guide on the inner or outer side, or both sides, of the rails. If the width of the rails does not correspond, adaptor plates can be made for you. The same is true if the two rails have different heights. There are adaptors ready for Jonsered/Lennartsfors/Serra-Filius, Woodmizer LT15, etc.

Measurements & Weights

Length: 720 mm (28 3/8″)

Height: 1000 mm (39 7/16″)

Width: 1400 mm (55 ¼”)

Weight: 200 kg (440 lbs)

Lumber Dimensions

Max. width: 600 mm (23 11/16″)

Height from rails: 600 mm (23 11/16″)

Cutter Head

Diameter: 72 mm (2 7/8″)

Width: 410 mm (16 3/16″)

Speed of rotation: approx. 6000 rpm

Max. take-off when planing: 7 mm (5/16″)

Max. knife pattern protrusion: 25 mm (1″)

Lateral adjustment: 200 mm (7 7/8″)

Planing knives are included as standard equipment.

 

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.