NEED FINANCE
Login
Rammy Snowblower
Rammy Snowblower
!*We are currently out of stock on all snowblowers until mid winter. You are welcome to place orders for fall 2024 at this time.*!
The Rammy ATV Snowblower allows you to easily clear snow on any surface, from pavement to gravel, or even grass areas. As a single stage snowblower, the Rammy snowblower is compact and allows your ATV to remain agile, even while blowing snow. The Rammy 120 is the base model, which can be upgraded with the 140 or 155 wing sets. These increase the clearing width of the snowblower. Likewise, you can upgrade to the Pro Engine, which is a 420 cc Briggs & Stratton engine. For the 155 wing set, we strongly recommend upgrading the engine.
Stop paying overpriced plow bills! Let Fox Forestry turn your ATV into a plow machine.
Width Options
As the pictures show, increasing the width is adding wings to increase the snow fed through the blower. First the metal wings and then the rubber if more width is desired.
Questions about mounting? Check out the youtube video in the "See How Others Use This Product" section!
Select Your Options
Request A Quote
Get a quote for: Rammy Snowblower - 120 (No wings) 47.5"
Quick Facts
About the Rammy Snowblower 120
General
The Rammy ATV Snowblower allows you to easily clear snow on any surface, from pavement to gravel, or even grass areas. As a single stage snowblower, the Rammy snowblower is compact and allows your ATV to remain agile, even while blowing snow.
Each snowblower has electric controls for chute rotation and deflector angle.
Due to its streamlined design, the Rammy can be installed or uninstalled in about 2 minutes (after the initial setup and mounting).
Start-Up/Electronics
The Rammy snowblower includes a control box that will mount to your ATV. However, the control box is only wired to the Rammy – no connections to your ATV are necessary. The control box houses the switches to control chute rotation and deflector angle, as well as an engine kill switch.
This snowblower comes with 120 volt electric start standard, as well as recoil pull start. Watch our video on how to start the Rammy HERE.
Mounting
The Rammy snowblower mounts with your existing center mount snowplow brackets. However, your ATV needs a winch to raise and lower the snowblower between mowing and transport positions. We also recommend using about 100 lb (45.36 kg) of ballast weight on the rear rack of your ATV. This will help offset the added weight of the Rammy.
Additionally, you can tighten your front springs (if adjustable) and adjust your front tire pressures to help alleviate the extra weight on the suspension. If your ATV has a soft front suspension, it would benefit from having heavy duty springs or spring inserts installed.
One thing to note is that the weight is only on the suspension in transport position. When blowing snow, the weight of the Rammy is on the ground via its adjustable skid shoes.